The annual Winter Preparedness Test for Interruptible Heat (Dual Fuel) Members is scheduled for Wed., Nov. 15, 2017. This load control test is performed in advance of the winter Full Load Control season (December 2017 - February 2018) to ensure member familiarity with the control sequence and to ensure that backup heating systems have been validated for proper function. The control will begin at 5 p.m., with restorals beginning at 8:30 p.m. and lasting no later than 11 p.m. During the test, residential Interruptible Heat load classes (2A, 2B, 2C, 2W, & 4B) will be controlled. Click on the Residential Management Status link below to view real-time control information.
To view the current load managment status by Dairyland Power Cooperative, click on the appropriate link below:
Load management/off-peak programs help keep the demand for electricity in balance with the available supply. During times of high usage across the system, load management allows St. Croix Electric Cooperative to reduce customer demand for electricity. Reducing demand results in a system-wide reduction of 70 megawatts (MW) in the summer and 160 MW in the winter, according to Dairyland Power Cooperative, SCEC's wholesale power supplier. One megawatt is equivalent to 1,000 kilowatts and can power - on average - 800 homes.
Load control is a voluntary program available to both homes and businesses. Participating members allow the Cooperative to manage the supply of electricity to specific pieces of equipment (e.g. water heaters and air conditioners) during times of peak electric use. Allowing the Co-op the flexibility to manage demand helps contribute to large-scale conservation efforts.
During times of PEAK Alert! (full load control), the Co-op asks larger and commercial customers to switch to generators for a period of time. PEAK Alert! usually only happens during times of extreme temperatures (June through August; December through February). Residential members can also aid in reducing non-essential electrical usage during these times. When a PEAK Alert! is issued, it will appear on the Cooperative website and on social media pages.
Using electric heating appliances, such as in-floor heat may also qualify participating members for lower, off-peak electric rates. To be eligible, a minimum of 7,000 watts of controlled electric heat must be included in construction. If you choose to participate, a radio-controlled device is connected to your heating system at no charge. If the demand for power reaches peak levels, a radio signal is sent to activate the controls on your equipment. The electric supply is then managed for short periods of time with little or no inconvenience to you.
The Co-op has load control/PEAK Alert! programs that fit the usage and facilities of nearly any home or business. Contact us via email for detailed information about how you can help manage demand by participating in load management.
Back to Basics ... Load Control vs. Full Load Control/PEAK Alert! (PDF, 06/2017)